Heating and Air in Fulton, Mississippi
Smith Climate Solutions LLC installs, repairs and maintains heating and air conditioning systems in Fulton, in Itawamba County, Mississippi. Our home base is Tishomingo County.
Heating and air in Fulton.
Fulton is a gas-heat town. By the Census Bureau's estimate, about 57 percent of occupied homes in Fulton heat with gas from a utility and about 42 percent with electricity. That is the highest share of gas heat among the towns we serve, so gas package units and gas heat matter here. We are an authorized Ruud dealer and install Ruud gas package units.
A gas system is worth having checked before the cold. On routine maintenance visits we have found a cracked heat exchanger and a leaking gas shut-off valve. A furnace tune-up covers the burner and ignition, the blower and motor, the safety controls and a cleaning.
The 30-year normal low for January at the Fulton weather station is 29.9 degrees, and the normal high for July is 89.3. The Census estimate for the median year built in Fulton is 1976, so about half the homes are older than that.
Fulton is in Itawamba County, one of the four counties we focus on. Tombigbee Electric Power Association, a Mississippi electric cooperative, has an office in Fulton.
What we do here.
AC Repair
We swapped a burnt control board on a package unit that had cooked a section of the board and left the system down. A new board and some cleanup brought it back. Compressor replacement, including a failed compressor on a 10-ton commercial unit.
HEATING REPAIR / 24/7 SERVICEHeating Repair
We replaced a failing draft inducer motor on a 2017 gas package unit and cleared out years of dirt, rust and debris inside the burner and inducer assembly. Systems that struggle to ignite or make unusual noises should be looked at before the cold really sets in.
CENTRAL AIR / REPLACEMENTAC Replacement
As an authorized Ruud dealer, we install Ruud equipment. The split systems in our posts run from 2.5 to 5 tons, including a 17 SEER system and a 2.5-ton system fitted into a tight attic. A new electrical disconnect at the outdoor unit, for safe service access.
HEAT PUMPS / HEATING AND COOLINGHeat Pumps
An outdoor unit on a pad and an air handler inside. As an authorized Ruud dealer, we install Ruud equipment. One of our recent jobs was a 5-ton Ruud heat pump with a new air handler in the attic. Everything in one cabinet outside, ducted through the foundation. We set a 5-ton package heat pump on a new construction home.
GAS PACKAGE UNITS / CHANGEOUTSGas Package Units
As an authorized Ruud dealer, we install Ruud equipment. We have done 3-ton and 5-ton changeouts, and replaced two split systems on one property with a pair of gas package units. One old 5-ton unit was sitting on rotten wood. We tore it out and rebuilt the base with fresh rock and a new pad. On another job we extended the concrete pad for a proper fit.
DUCTLESS / MINI-SPLITSMini-Splits
Two Gree mini-splits keep a large garage comfortable year-round on one of our jobs. We have also added a mini-split to a shop. An 18,000 BTU Gree mini-split turned an enclosed back porch into a room that is usable all year. We have installed them in a bedroom and an addition too.
DUCTWORK / AIRFLOWDuctwork
On one job we tore out the entire duct system under a house and redid it level, clean and sealed. We pulled old, torn flex duct out of a crawlspace and replaced it with solid hard pipe to fix airflow problems.
MAINTENANCE / TUNE-UPSMaintenance
We look over the whole system, indoors and out. We check refrigerant levels.
NEW CONSTRUCTION / ROUGH-INNew Construction
Ductwork run and the air handler set, ready for insulation and drywall. Proper layout and airflow design from the start, with clean installs.
COMMERCIAL / ROOFTOP UNITSCommercial HVAC
As an authorized Ruud dealer, we install Ruud equipment. We set a Ruud Commercial Series unit on a flat roof by crane and connected it. A 10-ton unit took a major hit with a failed compressor. We replaced it and put the system back to work.
Local facts.
- How homes heat
- About 57% gas, 42% electricity 845 of 1,476 occupied homes heat with utility gas and 617 with electricity. Survey estimates. Source: House Heating Fuel, table B25040, Fulton city, U.S. Census Bureau, American Community Survey 2020 to 2024
- Summer and winter
- 89.3°F July high, 29.9°F January low Monthly normals for the Fulton 3 W station. Source: U.S. Climate Normals, station USC00223208, NOAA National Centers for Environmental Information, 1991 to 2020 normals
- Age of homes
- Median year built: 1976 Estimate, plus or minus 3 years. Source: Median Year Structure Built, table B25035, Fulton city, U.S. Census Bureau, American Community Survey 2020 to 2024
- Electric cooperative
- Tombigbee Electric Power Association A Mississippi electric cooperative with offices in Fulton and Tupelo. Source: Tombigbee EPA, Tombigbee Electric Power Association
Our work, before and after.
These are our own jobs and our own photos. Each one lists what we installed and what we fixed around it.
17 SEER Ruud system replacing an outdated install
An outdated system with code problems removed and replaced with a 17 SEER Ruud system.
- System
- 17 SEER Ruud
- Outdoor unit
- New condenser on a pad
5-ton Ruud heat pump replacement
An old system replaced with a 5-ton Ruud heat pump and a new air handler in the attic.
- System
- 5-ton Ruud heat pump
- Indoor unit
- New air handler in the attic
5-ton gas package unit with a rebuilt base
An old 5-ton gas pack replaced, with the rotted base torn out and rebuilt on rock and a new pad.
- System
- 5-ton gas package unit
- Base
- Rotten wood removed; fresh rock and a new pad
Called him last minute on a Friday afternoon and he come right out and had me fixed up with in 30mins very professional and fair priced, highly recommended
My AC went down this past week. I called Luke, he come out and within a few hours had me back up and going. Good pricing and very professional.
I recently remodeled a space to be a man cave and my split unit wasn’t working right. I called Luke and he was out there the next day and had me fixed before he left that day! I recommend him highly!
I highly recommend Smith Climate Solutions LLC. The service was fast, and all I had to do was tell them what I was needing and Luke delivered exactly that. Couldn’t have asked for an easier or better experience!
This awesome company came out and fixed my heat a few days before Thanksgiving in 2025. I highly recommend them
Amazing people amazing service. Quick and Good at what they do 10/10 recommend
Read before you call.
It’s Not the Unit, It’s the Ductwork
When one room is always hot or cold, the cause is often the ductwork rather than the equipment. A duct that is torn, kinked, leaking or disconnected cannot deliver the air the system makes. ENERGY STAR says about 20 to 30 percent of the air that moves through the duct system is lost to leaks, holes and poorly connected ducts. Fixing or replacing the ducts can solve a comfort problem that a new unit would not.
Mini-Splits for Garages, Shops and Porches
Yes, a mini-split can heat and cool a garage, shop or enclosed porch. It needs no ductwork: an indoor head on the wall connects to an outdoor unit through a small line set. It is a good fit for spaces the main system does not reach and for rooms that never stay the right temperature. The size depends on the space, so have it looked at before you buy.
Cracked Heat Exchanger: What It Is and Why It Matters
A heat exchanger is the metal wall inside a gas furnace or gas package unit that keeps the burner flame and its exhaust separate from the air blown through the house. A crack can let combustion gases, including carbon monoxide, into that air. It is a safety problem. The U.S. Consumer Product Safety Commission urges a yearly professional inspection of fuel-burning heating systems, which is how a crack usually gets found.
Package Unit vs Split System: Which One Fits Your House?
A split system has two parts: an outdoor unit and an indoor air handler or furnace, joined by refrigerant lines. A package unit puts everything in one cabinet outside, with ducts running from it into the house. Neither is better for every home. Package units suit houses with ducts under the floor and no good place for indoor equipment. Split systems suit houses with an attic, closet or crawlspace air handler.
Repair or Replace? How to Decide on an Old AC or Furnace
Repair the system when one part has failed and the rest of the equipment is sound. Consider replacing it when it is past the age ENERGY STAR gives (more than 10 years for a heat pump or air conditioner, more than 15 for a furnace or boiler) and it also needs frequent repairs, has a major failure such as a cracked heat exchanger, or has never kept the house comfortable. Ask what failed before you decide.
What a Full System Maintenance Covers
A full system maintenance covers a full system inspection, a refrigerant level check, coil cleaning where the coils are accessible, an inspection of the electrical components, and a check of airflow and duct condition. A furnace tune-up adds the burner and ignition, the blower and motor, and the safety controls. ENERGY STAR says it is best to check the cooling system in the spring and the heating system in the fall.
Questions we get.
What heating and air services does Smith Climate Solutions offer in Fulton?
AC and heating repair, AC and heat pump replacement, gas package units, ductless mini-splits, ductwork, maintenance, new construction and commercial work. Fulton is in Itawamba County.
Do you work on gas heat in Fulton?
Yes. Most Fulton homes heat with gas: about 57 percent, by the Census estimate. We repair gas package units and gas heat, and we replace gas package units with new Ruud units.
What does a furnace tune-up cover?
The burner and ignition, the blower and motor, the safety controls and a cleaning. On routine visits we have found a cracked heat exchanger and a leaking gas shut-off valve.
How cold does it get in Fulton in winter?
The 30-year normal January low at the Fulton weather station is 29.9 degrees. No heat is an emergency, and we run service 24/7.
How do I get an estimate in Fulton?
Call or message (662) 660-3380, or send the quote form on this site. Estimates on new systems are free.
Tell us about the job.
Send the basics and we will follow up.
Something broken now? Request Service