Skip to content
SMITH CLIMATE SOLUTIONS LLC
HEAT PUMPS / HEATING AND COOLING

Heat Pump Installation in Northeast Mississippi

Smith Climate Solutions installs split and package heat pumps in Northeast Mississippi. One system heats and cools the house, and we set it so it looks as good as it works.

Need a repair instead? Request Service

What you get

Heat Pumps

01

Split heat pumps

An outdoor unit on a pad and an air handler inside. As an authorized Ruud dealer, we install Ruud equipment. One of our recent jobs was a 5-ton Ruud heat pump with a new air handler in the attic.

02

Ruud equipment

We are an authorized Ruud dealer. The Ruud page covers what we install, the equipment line and how Ruud’s own warranty works.

Ruud equipment
03

Package heat pumps

Everything in one cabinet outside, ducted through the foundation. We set a 5-ton package heat pump on a new construction home.

04

One system for both seasons

A heat pump is an air conditioner that can run in reverse. It cools in summer and heats in winter with the same equipment.

05

New disconnect and surge protection

A new disconnect at the unit and a surge protector to help protect the equipment long-term.

06

Drain protection

A float switch on the air handler drain to help prevent overflow and water damage.

The details

The numbers people ask about first.

Size Your System
Equipment we install
RuudSplit and package heat pumps.
Recent jobs
5-ton split, 5-ton packageOne replacement, one new construction home.
Split system
Outdoor unit + air handlerThe air handler goes in the attic, a closet or a crawlspace.
Package unit
One cabinet outsideDucted through the foundation. No equipment inside the house.
Estimate
FreeCall or message (662) 660-3380.

These describe our own recent jobs. The right size and type for your house are set when we look at it.

Done right. Left clean.

Works great, looks great too

We take pride in installs that not only work but look right. On the 5-ton heat pump replacement in our projects, the old system came out and the new one went in with every detail handled: the pad, the line set, the disconnect and the air handler in the attic. On the new construction job, the package heat pump sits square on its pad with the duct connections sealed into the foundation.

How we work
Plan for this

Split or package

A package unit keeps all the equipment outside. A split system puts the air handler indoors. The layout of your house and your existing ductwork usually decide it. See our guide.

Gas or electric heat

A heat pump heats with electricity. If your house has gas and you prefer gas heat, a gas package unit is the other route. We install both.

Your ducts still matter

A new heat pump on leaky or damaged ductwork will not fix a room that never gets comfortable. We look at the ducts too.

How a job runs

How a job runs.

  1. 01

    Call

    Call or message (662) 660-3380. A local company answers the phone.

  2. 02

    Look

    We look at the equipment, the ductwork and the electrical, and tell you when a repair makes more sense than a replacement.

  3. 03

    Estimate

    Free estimate on new systems.

  4. 04

    Install or repair

    A new pad or wall mount where it is needed, sealed duct connections, and a new disconnect and surge protector on installs.

  5. 05

    Finish

    Line sets covered, penetrations sealed, the site left clean.

FAQ

Questions we get.

What is a heat pump?

A heat pump is one system that both heats and cools. In summer it moves heat out of the house like an air conditioner. In winter it runs in reverse and moves heat in.

What is a package heat pump?

A package heat pump has the compressor, coils and blower in one cabinet that sits outside the house. Supply and return ducts connect to it through the foundation or wall. There is no air handler in the attic or a closet.

Can you replace my old system with a heat pump?

Yes. We replaced an old system with a 5-ton Ruud heat pump and a new attic air handler on one of the jobs in our projects. We will look at your ductwork and electrical and give you a free estimate.

Do you install heat pumps on new houses?

Yes. We rough in new construction and set the equipment. One of our projects is a 5-ton package heat pump on a new home.

What does SEER mean?

SEER is a seasonal efficiency rating for cooling. A higher number means the system uses less electricity for the same amount of cooling. The newer version of the rating is called SEER2. One of our recent replacements was a 17 SEER Ruud system.

Do you give free estimates?

Yes. Estimates on new systems are free. Call or message (662) 660-3380.

Service area

Tishomingo Co. · Itawamba Co. · Prentiss Co. · Lee Co. · Alcorn Co. · Hardin Co. TN · McNairy Co. TN

Done right. Left clean.

Tell us about the job.

Send the basics and we will follow up.

Something broken now? Request Service

Authorized Ruud dealer
No heat or no AC? Get help now
Call Service quote